American Weigh AMW-600S Digital Gram Gem Pocket Scale 600 x 0.1g

$18.65  $14.55
Save: 22% off

American Weigh AMW-600 Digital Pocket Scale 600 x 0.1g

The AMW Series is a great durable and compact pocket scale for those who are seeking the on the go high tech touch screen portable scale. The backlit LCD display helps make the numbers viewable and easy to read. The intuitive protective cover provides protection for the scale. With the smooth stainless steel weighing surface clean up is easy. Push buttons on the scale give you full control such as: switching modes grams, ounces, troy ounces, pennyweights and tarring. This checkbook size scale offers great range from 600 grams to as little as 0.1 of a gram. You get all this in one scale backed up with our incredible 10 year warranty!

Whether this fits your style or needs - the AMW Series is the portable pocket scale that packs punch and gets the job done!

  • 600g Capacity
  • 0.1g Resolution
  • Backlit LCD
  • Flip-open lid protects the delicate weighing surface.
  • Great for precision weighing on the go.
  • Reads in g, oz, dwt, ozt
  • Stainless steel weighing platform.
American Weigh AMW-600 Digital Pocket Scale 600x0.1g

Capacity600g / 21.16oz/ 19.29ozt / 385.8dwt
Readability0.1g / 0.005oz / 0.005ozt / 0.1dwt
Display5 digit backlit LCD
Calibration weight

500g NOT included

To purchase CLICK HERE

Platform dimensions2.5 x 3
Scale dimensions5 x 3 x 0.75
Power2 X AAA batteries included
Gross weight0.47lb

AMW Series Manual

Thank you for purchasing the American Weigh AMW-Series digital scale. Please read all operating instructions carefully before use. This electronic scale is a precision instrument. With normal care and proper treatment, it will provide years of reliable service.

Never load the scale with more than the maximum

capacity. Overloading will permanently damage it!

Avoid any exposure to extreme heat or cold. Your scale works better when operated at normal room temperature. Always allow the scale to acclimate to normal room temperature for at least one hour before use.

Give your scale sufficient warm up time. Usually

Keep your scale in a clean environment. Dust, dirt, moisture, vibration, air currents and a close distance to other electronic equipment can all cause an adverse effect on the reliability and accuracy of your scale.

Handle with care. Gently apply all items to be weighed onto tray top. Although this scale is designed to be quite durable, try to avoid rough treatment as this may permanently damage the internal sensor.

Avoid shaking, dropping or otherwise shocking the scale. This is a precision instrument and must be handled with extreme care.

30-60 seconds before calibration to give the internal components a chance to stabilize. 

Only operate the scale on a stable, vibration free surface.


Place Scale on a horizontal flat surface.

1. Press [ON/OFF] key.

2. Wait until "0.0" is displayed.

3. Put the object(s) on the weighing platform.

4. Using the [MODE] key, you can switch between the

weighing units. 


1. Turn on scale as described above.

2. Place the "tare item" on the platform.

3. Press [TARE] and wait until "0.0" is displayed.

4. Add the "net-weight-item".


Calibration is NOT required before first use. Only

calibrate if scale is not weighing properly.

**Make sure you use the correct calibration weight for your scale or the calibration will not be accurate**

AMW-55: 50g calibration weight

AMW-100: 100g calibration weight

AMW-250: 200g calibration weight

AMW-600: 500g calibration weight

Calibration Procedures for AMW-250 & AMW-600

1, Turn OFF the scale, press and hold the [CAL] key and then press [ON/OFF] shortly. After 1-2 seconds, the scale will display a random number. Now release the [CAL] key.

2, Wait 2 seconds and press [ON/OFF] key again shortly.

3, The LCD display will read "2ero" followed by the amount of weight required to calibrate (listed above).

4. Place the required calibration weight on the platform (ie. AMW-600 place a 500g on the scale)

5. Press [ON/OFF] again. The LCD display reads "CAL", then "PASS".

6. Remove the weight and press [ON/OFF] to turn off the scale. Finished! Repeat if needed.

Calibration Procedures for AMW-55

1. Turn OFF the scale.

2. Press [ON/OFF] shortly. Then immediately press and hold

3. Press [MODE] again. Now the display will show "CAL" and "50.00" will flash 3 times.

[MODE] until "CAL" is displayed. Release the [MODE] key.

4. Place a 50g weight on the center of platform. Wait 3-4 seconds. The LCD display will read "PASS", then "50.00".

5. Remove the weight and press [ON/OFF] to turn off the scale. Finished! Repeat if needed.

Calibration Procedures for AMW-100

1. Turn on the scale by pressing [ON/OFF] key.

2. Wait until the LCD displays "0.00" and then press and HOLD

3. Press the [MODE] key again, the LCD will display "CAL" and

4. Add a 100g calibration weight, the display will show "PASS" and return to normal weighing mode.

5. Put away the calibration weight and press [ON/OFF] to turn

the [MODE] key for 3 seconds, the LCD will display "CAL" then release the [MODE] key. then "100.00" of the scale and the calibration is finished! 


The primary reasons for inaccuracy or malfunction are low batteries, incorrect calibration, overload or operating on an unstable surface. Please keep this in mind and maintain and operate your scale properly. This scale is a precise instrument and must be handled with the utmost care and caution.


Elimination of errors 

Nothing, Battery-Symbol, [lo] or [88888]

Change the batteries.


Recalibrate the scale as shown above. 


You are overloading the scale. Remove the excessive load immediately! 


The delicate weighing load cells have been damaged by misusing the scale (i.e. it was shocked, dropped or overloaded). You can try recalibrating the scale. If the load cell has not been damaged too much it will work again after recalibration. 


Use the scale in a more stable position

Add to Cart:

  • Model: AMW-600S
  • Shipping Weight: 0.8lbs
  • 85 Units in Stock
  • Manufactured by: American Weigh Scales

This product was added to our catalog on Tuesday 01 November, 2011.

Copyright © 2019 Hosting and Domain registration services by
Gold Silver and Platinum Testing Solutions